Akai S2000 firmware 2.0.bin - firmware file  OS 2.0

1. You need EPROM 27C040
2. program the memory
3. desolder EPROM socket DIP28 from motherboard - IC12
4. solder new socket DIP32 in place of desoldered one
5. desolder jumper near socket signed s2000
6. solder jumper signed s3000xl
7. insert programmed chip into socket

done

You need to insert any diskette (buy not system one) because OS checks Floppy for some reason and stops when not detected something there. If you have Flash FMX-008 - there is no problem with sampler start.

S2000 start is very fast. Min. twice compared to load system from Flash Card.

Brought to you by tOri - Polish reverse-engineer and Atari Fan!

https://reversing.pl/ 